/mlpol/ - My Little Politics

Zip file here
https://anonfiles.com/XfQ1J693pc/GlockBlocks_zip

>>298568
Here's my questions:

1. Approimately, how many rounds have you fired through this thing before there was a structural failure, if any at all?
2. What material(s) did you test full functions with this design?
3. What kind of gotchas did you find/figure out with this compared to a real glock?
4. How hard would it be to convert this into an air gun for the sake of plausible deniability?
5. How can we avoid fucking ourselves legally if we use these for home-and-self-defense?
6. How can we trust you're not a glowfag or that your files won't keep us from being sniffed out by glowfags or corporate stooges?

>>298623
> 1. Approimately, how many rounds have you fired through this thing before there was a structural failure, if any at all?
Its a Glock frame...... it was plastic to begin with, if the 3d printed Freeman frame is anything to go off then thousands of rounds before it wears out at least. Risk of catastrophic failure is low since the top parts are what deal with the pressure.

>2. What material(s) did you test full functions with this design?
Cheapest basic PLA you can buy, works fine. probably use nylon if you plan to mag dump with a giggle switch due to heat.

>4. How hard would it be to convert this into an air gun for the sake of plausible deniability?
Like an actual airgun or something you can swap back into a gun with hidden parts, at that point why don't you just hide the whole gun? I am not following your logic, elaborate.

>5. How can we avoid fucking ourselves legally if we use these for home-and-self-defense?
In Germany kek put a 3d printed silencer on it so nobody knows you used it on the robber who broke in and get rid of the body yourself. I recommend putting a tarp out, chopping the body into small parts and blending them into pulp. You can then just flush it down the toilet and the body never needs to leave the area where the murder/self defense happened.

If you really are in Germany I would recommend you just make a FGC9 since it was made by euros with stuff they can actually get their hands on. The Glock frames are for Americans because not only is it legal to make the gun here you can also just buy all the parts on the internet. People usually do this to save a little money and avoid being in a firearms database.

This is something more reasonable for you to actually build 100% from scratch. Pic related
https://lbry.tv/@Deterrence-Dispensed:2/FGC-9:e

I will probably tackle a 100% diy from scratch gun in a week or 2, something euro poors can actually do, the FGC9 still requires 9mm ammo. I will probably go straight 3d printed ammo and favela loads with mine. Favela loads being nothing but ground up match heads as smokeless powder replacement. No primer, probably integrate a cheap arc lighter into it or something. Surprised no one has gone the arc lighter-match heads route with these 3d printed gun projects so far.

>>298623
3. What kind of gotchas did you find/figure out with this compared to a real glock?

I figured out the Glock is a unredeemable piece of shit, its basically a Saturday night special made as cheap as humanly possible that somehow got memed into being worth more then the 200$ it should have been brand fucking new.

Its overpriced and only retards would think it is a good gun, top heavy, worst fucking trigger in existence, no safety, all the parts are stamped sheet metal crap. The only reason I did this all in CAD was because you can find Glock parts and mods everywhere. Its as popular a hand gun as the AR15 is a rifle except the AR15 is actually a good design.

Simply holding the thing makes me want to throw up, I have a standards to compare it. Probably base my next design on the P08 Luger, no gun I have ever fired was as accurate or allowed such seamless follow up shots. The p08 luger also seemed to virtually eliminate recoil due to its sophisticated toggle mechanism.

>>298623
>6. How can we trust you're not a glowfag or that your files won't keep us from being sniffed out by glowfags or corporate stooges?
They are archives.
1: Download archive. Files can't do shit from there until opened.
2: Use a tool that can scan the archive for malware without opening it
2/a: If still feeling paranoid, use a PC not connected to the Internet / on a disconnected home network with only your PC and your printer
3. Be happy.

>>298639
>I will probably tackle a 100% diy from scratch gun in a week or 2, something euro poors can actually do
>favela loads
You're doing god's work, Anon. It does make me wonder what the best board would be to host it (A 4/k/ alternative? Do we have something like that? Does this technically qualify for /cyb/, because it is technology related?), but I am very glad it is somewhere on the site, at least.

>>298623
> How can we trust you're not a glowfag or that your files won't keep us from being sniffed out by glowfags or corporate stooges?
They are Stl files anon, its like saying a jpeg could have a virus....

>>298650
It does make me wonder what the best board would be to host it (A 4/k/ alternative? Do we have something like that? Does this technically qualify for /cyb/, because it is technology related?), but I am very glad it is somewhere on the site, at least.

The only reason you guys get the dump is because I am to lazy to proxy chain into /k/ properly and make another email just to buy another 4chan pass.

As for the euro poor gun I have it figured out. 12g sawn off shotgun with 3d printed primer-less ammo. There will be a cheapo plasma lighter in the grip to ignite the shells, I will also make a secondary redundant firing pin set up incase people have actual 12g ammo for it as well.

So all a euro poor will need to make this double barrel boom stick is.
1: 10$ usb rechargeable plasma lighter
2: 2 pieces of steel pipe
3: A 200$ 3d printer
4: A box of matches to grind up for smokeless powder replacement.
5: Random junk to stuff into the 3d printed shells. (ball bearings, coins, bundle of nail heads)

A double barrel 12g is the simplest functional thing I could come up with. It will look exactly like pic related, expect something in a week. Hopefully I can narrow down the assembly time to a few hours minus the 3d printing and with no metal working tools.

packed your archive into a png for easy sharing

>>298660
Thx anon, now you have me searching how to embed zips into an image. Never even thought of that, should be useful when the europoor 12g is done.

>>298568
So what print settings do I need for this? Infill 100% for sure I know, but what about layer height print orientation? Some receivers I've seen need to be printed on an angle to be structurally sound for shooting, and I feel like this one would be no exception.

>>298652
which 3d printer?
(not that I'm going to do anything fbi)

>>300239
Ender 3 is what most people get, but really, it doesn't matter.

Fresh 3d printed file dump, enjoy and spread.

G19 SMG frame, all parts easily available online.

I need a dragon dildo bayonet. Don't ask why just make it please.

Not sure if it's made of plastic or cardboard.